BendPak 10APX Pro Series High-Rise ALI 2 Post Lift Package

Product Overview

BendPak 10APX Pro Series High-Rise ALI 2 Post Lift Package

Introducing the BendPak 10APX PRO-Series High-Rise two-post lift, designed specifically for mechanics who constantly work in difficult positions beneath vehicles. This powerful ALI-certified lift delivers an impressive 10,000-lb. lifting capacity and features an exceptional 75.5" max rise height with a rise + pad of 79.5" and a towering 157" overhead beam. Combined with advanced Low-Pro™ arms, revolutionary Bi-Metric™ adaptable swing arms, and BendPak's exclusive Automatic Arm Restraint System (AARS), the 10APX offers unrivaled operator comfort, efficiency, and safety. This package includes the WSA-100 Wall Service Assembly for integrated air and electrical service, plus a full set of frame cradle pads, medium (2.5") and tall (5") 60mm adapters, and an adapter holder everything you need for versatile, heavy-duty vehicle service right out of the box.

Auto repair shops must stay ahead of the curve by equipping themselves with the best tools available. The BendPak PRO-Series combines cutting-edge lift technology with a revolutionary engineering concept, delivering a two-post lift unlike any other. Purposefully designed for extreme use, high loads, and unmatched operator safety and efficiency, the PRO-Series is built to handle today's evolving automotive landscape—including increasingly heavy electric vehicles (EVs), hybrid trucks, SUVs, and sports cars.

Engineered for the Future of Automotive Service

Over the past few decades, the automotive industry has been a leader in adopting new technologies. The shift toward electric, hybrid, and gas-fed engines is redefining vehicle fuel use, with electric vehicles (EVs) poised to dominate future production. EVs weigh significantly more than traditional gasoline or diesel vehicles due to added batteries, reinforced frameworks, heavier suspension systems, and protective metal armor for battery packs. This extra weight increases stress on automotive lift components — particularly in two-post lifts — posing safety challenges when raising vehicles for service.

The PRO-Series 10APX addresses these challenges head-on. BendPak engineers have enhanced under-car access thanks to the extremely low-profile arms and extra-wide column spacing (with options for 135" or 145" overall width ). Critical load-holding components are crafted from high tensile-strength steels, allowing greater telescoping movement in swing arms and tube profiles specifically tailored for low ground clearance vehicles and the outer-positioned lifting points common to EVs.

With the rise of larger and heavier EVs, technicians can now service electric vehicles—including trucks, vans, and sports cars—more efficiently and safely. The PRO-Series 10APX is the perfect EV service solution, offering versatile lift support positioning ideal for electric vehicle maintenance and repair.

Revolutionary Automatic Arm Restraint System (AARS)

Swing arm restraints have been used for decades on two-post lifts to minimize the chance of arms shifting during vehicle loading and service. However, until now, traditional systems struggled to withstand the excessive forces applied when vehicles suddenly and unexpectedly shifted on the support pads or adapters—typically due to improper loading or when heavy drivetrain components are added or removed, causing an unanticipated shift in the vehicle's center of balance.

The BendPak PRO-Series features the groundbreaking Automatic Arm Restraint System (AARS), engineered specifically for heavy vehicle service. With a full 360-degree load-holding grip, this patented, heavily forged-steel design secures lift arms firmly in place with over 2,000 pounds of load-holding force, preventing unplanned swing arm movement during lift use and vehicle service operations.

This revolutionary design is an adaptive system that requires minimal operator involvement and delivers unparalleled holding power. Its distinctive power-hold design ensures precise, non-shifting action, while a handy quick-release operator lever allows for the instant release of clamping pressure, enhancing both efficiency and safety on the shop floor.

BendPak Automatic Arm Restraint System (AARS) in action

Triple-Telescoping Nested Swing Arm Design

Revolutionary and patented swing arms are specifically tailored for varying vehicle lifting points. Unlike traditional two-post lift arms, 10APX arms retract shorter and extend farther, offering lift operators a myriad of lift arm positioning options—it's like having the best of all worlds.

The innovative three-stage arms achieve more telescoping movement due to their patented nesting feature, resulting in greater retraction and farther reach. Inner sliding arm movement is no longer impeded by arm end plates, tube closeouts, or even the arm pivot pin itself. The inner tubes retract fully through the back of the arm assembly and even beyond the arm pin, allowing for maximum achievable retraction and extension. This design delivers front arm reach of 24.5" to 50" and an impressive rear arm reach of 32" to 59.25".

Each arm supports a maximum load of 2,500 lbs., providing safe, stable lifting for a wide variety of vehicles.

Low-Pro™ Swing Arms for Enhanced Access

BendPak's exclusive Low-Pro™ swing arms incorporate telescoping channels with a lowered profile and dropped-end pad receivers. This design facilitates easier access to lift points on lowered chassis-height vehicles, reducing the risk of damage to vehicle side skirts, running boards, or ground effects. The minimum pad height of just 4" makes it easy to slip pads beneath even the lowest-slung vehicles.

Combined with varying height stackable adapters and two-stage spin-up screw pads (2" / 51mm adjustment), these arms offer precise and safe vehicle support with enhanced vertical pad placement.

Bi-Metric™ Adaptable Swing Arms

The Bi-Metric™ adaptable swing arms are another exclusive BendPak feature, allowing users to load vehicles symmetrically or asymmetrically without needing to switch arms. This versatility dramatically speeds up vehicle servicing, making the PRO-Series 10APX an ideal choice for efficient and effective automotive maintenance in busy shop environments.

Screw Pads, Frame Cradle Pads & Stackable Adapters

When it comes to lifting full-sized trucks or SUVs onto a two-post lift, you can't cut corners. Reduce your risks with BendPak's Frame Cradle Pads, ensuring your vehicle stays securely in place during every lift operation. Included in this package, the Frame Cradle Pads (set of 4, 60mm pin) feature a rugged build designed to withstand heavy use for the lifetime of your shop. The heavy-duty steel construction and thick polyurethane rubber pad lining provide durability and protection, while the textured polyurethane surface safeguards your chassis frame from damage and minimizes slipping.

This package also includes Medium (2.5") 60mm Adapters (set of 4) and Tall (5") 60mm Adapters (set of 4), along with an Adapter Holder for convenient storage. These stackable adapters enhance the versatility of your lift, accommodating vehicles with uneven underbodies effortlessly. Featuring a 60mm diameter pin that seamlessly drops into the lift arms, these pins instantly extend your lift's height, ensuring safe and easy lifting for any vehicle. They can also be paired with other BendPak accessories, such as Screw Lift Pads, for endless customization options.

WSA-100 Wall Service Assembly Included

This package includes the WSA-100 Wall Service Assembly, providing integrated air and electrical service right at your lift. The WSA-100 is easy to install and adapts to any two-post or four-post lift. It features:

• Four 110V GFI outlets equipped with 20 amp industrial GFI protection

• Electrical outlets located above the air service to prevent moisture damage and tangling

• Air service through 2 outlets: one lubricated for tire inflation and one for pneumatic tools

• Air service filter element and lubricator filler port that are easily accessible

• Nickel-plated ball valve shutoff

• Powder-coated finish for durability and long life

• Storage hooks for hoses and tools

• Regulator / filter and pressure gauge

• Air inlet and oiler

The WSA-100 keeps your workspace organized and efficient, ensuring power and air are always within reach.

Customizable Width Configurations

Experience the ultimate convenience with the PRO-Series 10APX, offering both wide and narrow installation options in one customizable package. The expandable top beam accommodates wide or narrow drive-thru configurations, providing an inside column clearance of 108.5" or 118.5" and a drive-thru clearance of 97.5" or 107.5". This flexibility ensures the lift adapts perfectly to your shop layout and vehicle service needs.

Built for Durability, Safety, and Reliability

Built to last, the 10APX ensures durability, safety, and reliability for all your automotive needs. Key features include:

• Durable powder coat finish for long-lasting protection

• Padded overhead safety shutoff bar

• Single-point safety release for ease of use

• Dual hydraulic direct-drive cylinders

• Oversized 53" & 59" tall carriages for superior strength and durability

• Electric / hydraulic HVLP power system (220 VAC / 60 Hz / 1Ph)

• Self-lubricating Dura-Glide® UHMW polyethylene bearing system

• Safety locks in each column spaced every 3"

• 3/8" (10mm) high-strength multi-strand galvanized steel equalizing cable

• Oversized cable sheave diameter reduces cable fatigue

• Time to full rise: approximately 45 seconds

• Noise level: <70 dB

• ALI certified for compliance with industry safety standards

The PRO-Series 10APX simple yet sophisticated design minimizes service and maintenance costs, lowering your operating expenses and boosting your shop's productivity. Choose BendPak for quality, efficiency, and performance that exceed expectations.

Key Highlights

• 10,000 lbs. lifting capacity handles heavy trucks, SUVs, and EVs

• 75.5" max rise / 79.5" rise + pad exceptional under-vehicle access

• 157" overall height high-rise design for comfortable working positions

• Automatic Arm Restraint System (AARS) over 2,000 lbs. holding force for unmatched safety

• Triple-telescoping nested swing arms extreme retraction and extension for versatile positioning

• Low-Pro™ arms with 4" minimum pad height ideal for low-clearance vehicles

• Bi-Metric™ swing arms symmetric or asymmetric lifting without changing arms

• Expandable top beam customize for wide (118.5") or narrow (108.5") drive-thru clearance

• WSA-100 Wall Service Assembly included integrated air and electrical service

• Complete adapter package included frame cradle pads, medium & tall adapters, adapter holder

• ALI certified meets rigorous industry safety standards

The design, material and specifications are subject to change without notice.

Product Features

• Durable powder coat finish

• Expandable top beam accommodates wide or narrow drive-thru configurations

• Double-telescoping screw pads offer increased versatility

• Padded overhead safety shutoff bar

• Exclusive Bi-Metric™ arm design for more versatile arm positioning

• Single-point safety release

• Drop-end arms provide a lower pad heigh

• Dual hydraulic direct-drive cylinders

• Oversized 53" & 59" tall carriages for superior strength and durability

• Electric / hydraulic HVLP power system

• Self-lubricating dura-glide UHMW polyethylene bearing system

• Safety locks in each column spaced every 3"

• Automatic arm restraints withstand over 2000-pounds of side force

• 3/8"(10mm) High-strength multi-strand galvanized steel equalizing cable

• Oversized cable sheave diameter reduces cable fatigue

• Four triple-telescoping arms

• ALI certified

Includes

WSA-100

• Easy to install

• Adapts to any two-post lift and four-post lift

• Electrical outlets equipped with 20 amp industrial GFI protection

• Electrical outlets located above the air service to prevent moisture damage and tangling

• Air service through 2 outlets: one lubricated for tire inflation and one for pneumatic tools

• Air service filter element and lubricator filler port are easily accessible

• Nickel-plated ball valve shutoff

• Powder-coated finish for durability and long life

• Four 110V GFI outlets

• Oiler

• Air supply

• Pressure gauge

• Storage hooks for hose and tools

• Regulator / filter

• Air inlet

Frame Cradle Pads

• Set of 4

• 60mm pin

Medium Adapter 60mm

• Set of 4

• 2.5"

Tall Adapter 60mm

• Set of 4

• 5"

Adapter Holder

Product Specifications

Model

10AP
10AP-168
10APX
10APX-181

Capacity

Lifting Capacity: (*)

10,000 lbs. (4,536 kg)

Rise

A Max Rise

69" / 1,753 mm

75.5" / 1,918 mm

B Rise + Pad Only

73" / 1,854 mm

79.5" / 2,007 mm

C Rise + Pad + 63 mm Adapter

82.5" /2,096 mm

89" / 2,261 mm

D Min. Height + Pad

4" /102 mm

Time to Full Rise

≈45 seconds

Outside Dimensions

E Height Overall

145" /3,683 mm

168" / 4,267 mm

157" / 3,988 mm

181" / 4,597 mm

F Width Overall

135" or 145" / 3,431 mm or 3,683 mm

G Outside Column Width

127.5" or 137.5" / 3,239 mm or 3,493 mm

Inside Dimensions

H Inside Columns

108.5" or 118.5" / 2,756 mm or 3,010 mm

I Drive-Thru Clearance

97.5" or 107.5" (2,477 mm or 2,731 mm)

J Floor To Overhead Switch

140" / 3,556 mm

163" / 4,140 mm

152" / 3,861 mm

176" / 4,470 mm

Arms & Pads

K Front Arm Reach (Max)

50" / 1,270 mm

K Front Arm Reach (Min)

24.5" / 622 mm

K Rear Arm Reach (Max)

59.25" / 1,505 mm

K Rear Arm Reach (Min)

32" / 813 mm

Max Load Per Arm

2,500 lbs. / 1,134 kg

Screw Pad Adjustment

2" / 51 mm

Power Unit

Motor

220 VAC / 60 Hz. / 1Ph

Noise

<70 dB

The design, material and specifications are subject to change without notice.

Key Features

• Published product configuration: BendPak 10APX Pro Series High-Rise ALI 2 Post Lift Package Introducing the BendPak 10APX PRO-Series High-Rise two-post lift, designed specifically for mechanics who constantly work in difficult positions beneath vehicles. This powerful ALI-certified lift delivers an impressive 10,000-lb. lifting capacity and features
• Exact manufacturer model or part number: 5175648
• Cataloged for Lifts & Hoists: Car Lifts — 2 Post Lifts
• 4 product manual or technical documents linked below
• Condition: New

Product Specifications

Before You Order

Confirm that model 5175648, the listed capacity or working range, power requirements, dimensions, and site-delivery needs match your application. Only specifications stated in this listing should be used for purchase planning.

Manuals & Technical Resources

• Product document 1
• Product document 2
• Product document 3
• Product document 4